 Wafer Thinning/Dicing Technician |
| As a Wafer Thinning/Dicing Technician within the Assembly department at Micron, you will work in ... |
|
| Electrical Design Engineer |
| As an Electrical Design Engineer at Micron, you will perform circuit definition, design, and ... |
|
| Senior CMOS Image Sensor Product Engineer |
| Senior CMOS Image Sensor Product Engineer
/*--------------------------------------... |
|
| Fab 1 Metrology Technician |
| As a Metrology shift Technician for Micron Technology, Inc. you will be responsible for the ... |
|
| Water/Wastewater Project Manager/Engineer |
| Company Description:
HDR is an architectural, engineering, planning and consulting firm that excels ... |
|
| Urban Planner/Traffic Engineer |
| An engineering company in Boise is seeking an Urban Planner/Traffic Engineer. This is ... |
|
| Designer |
| Position: The successful candidate will have a minimum of six years work experience in civil site ... |
|
| Failure Analysis Technician |
| As a Failure Analysis Technician at Micron, you will be responsible for identifying causes of yield ... |
|
| Packaging Signal Integrity Engineer |
| As Packaging Signal Integrity engineer, you will be responsible for the analysis and evaluation of ... |
|
| Process Engineer - Systems Integration |
| As a Process Engineer, you will be responsible for developing, maintaining, and optimizing process ... |
|
|
New Product Program Director
| Details |
Country: USA
Location: ID Boise
Total applied: 24
Job Type: Employee
Job Status: Full Time
|
|
New Product Program Director
Job Description:Program Manager for S8 PSOC3 Job Specific Requirements: 1. Responsible for Program Management of UDB for PSoC3 (architecture development & validation for Big5 applications: CAN/LIN, Ethernet, LPC, USB, I2C 2. Coordinate integrated silicon, firmware & software development for UDB 3. Integral partner in PSOC business unit: New product development & market introduction Minimum Education & Work Experience:BS, MS or PhD EE (or equivalents), Electrical Engineering Design 7-10 years, management experience over multiple design teams & strong technical skills 5 years in Design Management Experience with Cypress New PRoduct Development System
Cypress Semiconductor is an Equal Opportunity Employer
|
| Related jobs |
|
|
Failure Analysis Engineer
As a Flash Failure Analysis Engineer at Micron, you will be in a highly visible role responsible for conducting failure analysis and system correlation on all FLASH ...
|
|
|
R & D (Fab 4) Lithography Equipment Engineer
As an Equipment Engineer in Fab 4 Lithography, you will be part of a team of engineers working on state-of-the-art coat/bake/develop track equipment development to ...
|
|
|
FAB 4 PCVD/Implant Equipment Technician
As a PCVD Technician at Micron, you will be responsible for monitoring, sustaining, and improving your assigned area while working with production operators and area ...
|
|
|
MPMTC Technician
MP Mask Technology Center (MPMTC) is one of the world's leading manufacturers of reticle solutions. As a technician in the MP Mask Technology Center (joint ...
|
|
|
Fab 1 Process Integration Engineer (Imaging)
As a Fab 1 Process Integration Engineer at Micron, you will be responsible for process sustaining and maturation of CMOS imagers in Fab 1B. In this position you will ...
|
|
|
Statistician
As a Statistician at Micron, you will be responsible for driving the improved understanding and utilization of statistical tools and methods throughout the manufacturing ...
|
|
|
R&D Advanced CMOS Process Integration Engineer
As an Advanced CMOS Process Integration Engineer at Micron, you will propose, develop, and optimize production-worthy, high-performance, and low-cost CMOS device process ...
|
|
|
Land Planner
Boise, Idaho Civil/Survey Engineering Firm is seeking an experienced & motivated Land Planner. This Firm is an E.O.E.?Strong land planning, land entitlement, permitting, ...
|
|
|
Fab 1 CMP Technician
As a CMP Technician at Micron, you will be responsible for monitoring, sustaining, and improving your assigned area while working with production operators and area ...
|
|
|
Mechanical/Manufacturing Engineer
The primary function of this engineering position will be to support and improve the manufacture and quality of a life-safety device. The secondary function will ...
|
|
| Related press releases |
Still hungry
For supper tonight, three-quarters of us will be eating mainly stodge - a pile of carbohydrates. One in 10 people on the planet will dine on a mash of cassava root (remem...
|
|
Derbyshire is top cut
The Derbyshire building society is so far the only institution to have cut the rates on its savings accounts by more than 0.5 per cent, following the 0.25 per cent base r...
|
|
Bombardier cuts put Belfast jobs at risk
More than 200 aerospace jobs in Northern Ireland at the old Short Brothers factory are at risk after the owner said it was cutting production rates of one of its aircraft...
|
|
GCSE pupils urged to stay on at school
The government last night admitted it was still worried by the high school drop-out rate, urging the thousands of youngsters who will receive their GCSE results today to ...
|
|
Saddle up in safety
Cyclists who have taken to the roads following the bomb attacks in London are being warned to check that they have adequate insurance cover and legal advice in the event ...
|
|
Going flat out
Lobbying for an overhaul of the tax system by the adoption of a controversial system of "flat tax" has been a staple of the US political right for some time. The subject ...
|
|
Bank chief widens rift with Brown
The division between the Treasury and the Bank of England over the health of the public finances widened yesterday when the Bank's governor, Mervyn King, openly questione...
|
|
Ulster students celebrate GCSE success
Thousands of pupils across Northern Ireland were celebrating their GCSE results today.
Two days ahead of the release of results by exam boards in England and Wales, Ulst...
|
|
Banks call for data-sharing on personal credit histories
Stories of customers with wallets stuffed full of credit cards, stacked up with more debt than their holders can afford to repay, have become commonplace amid the outcry ...
|
|
Report urges overhaul of Welsh social services
Social services in Wales need an urgent relaunch to deal with high staff-vacancy and turnover rates, a major new report has recommended today.
A two-year multi-agency re...
|
|
|
|
Engineering 
